Products_第4页_Dongguan Hongyue Trading Co., Ltd.-Vulcanization

中文

HOME > Products

PRODUCTS

Bond-It 7050 Specialty High Temp. Adhesives

Home

Last

Main products: Cotronics Duralco, Resbond, Durapot, Durseal high-temperature resistant epoxy resins and various metal ceramic adhesives, German Siko SI COATING and Lorde vulcanization treatment agents, and other special chemical synthetic materials

2100°F Rescor™ 902 Alumina Silicate

Easily machined with standard shop equipment. Can be turned, drilled and shaped. Produces sharp, detailed parts with close tolerances. 902 provides excellent electronic, mechanical and thermal properties and will not out gas in a vacuum. Applications Include: electrical insulators, furnace components, brazing, soldering, welding fixtures, thick and thin film applications, R.F. heating fixtures, prototype ceramic components, etc.

1000°F Rescor™ 914 Glass Ceramic

Dense and vacuum tight. Machines on conventional shop equipment and standard cutting tools. No post machining heat treatments are required. Offers high impact and mechanical strength and low thermal conductivity. Ideal for vacuum feed thrus, electrical and vacuum needs, electrical parts and can be metalized for soldering applications.

1800°F Rescor™ 915 Macor™ Glass Ceramic

Dense and vacuum tight, glass ceramic composite with “0” porosity. No heat treatments are required. Can be ground, sawed, turned, tapped, milled and drilled, etc. Offers excellent electronic properties, even at high frequencies. Ideal for critical medical and vacuum applications, for insulators with high dielectric strength and chemical resistance.

3000°F Rescor 960 Alumina

Provides the chemical, thermal and electrical properties of standard high purity alumina ceramics. Can be machined with standard shop equipment. No heat treatments are required. Now 96%, high Alumina parts can easily be made with the convenience of an "in house" process. Ideal for applications in electrical, electronic, metallurgical and vacuum industries.

3000°F Rescor™310M Fused Silica Foam

310M Ceramic foam is composed of over 99% pure Fused Silica Ceramic and offers low thermal expansion and conductivity, high thermal shock resistance and high thermal reflectance. It is easily cut, sawed and drilled. 2000ºF, white hot, parts can be immersed in water with out cracking. Resistant to: oxidizing and reducing atmospheres, molten metals, steam, corrosive gasses, most acids, chemicals and solvents.

Resbond 940 2000°F Fast Setting Adhesive

● Just mix and apply. Cures in 5 minutes at 175°F or in 16 hours at room temp. without any objectionable or toxic odors. 940 is specially formulated with a catalytic activator making it ideal for use in production applications. ● Has excellent adhesion to ceramics, metals, glass, etc. and provides high electrical, thermal and shock resistance. ● Used for sealing and assembling parts, encapsulate heating elements, form electrically resistant coatings. Users Report Resbond 940 encapsulates industrial heating elements and high temp. Sensors. Resbond 940 outperforms other ceramic adhesives and materials tested.

Resbond 940LE 2500°F Fast Set, Low Expansion Adhesive

● Now, for the first time, an adhesive specially designed to bond low expansion materials or use in difficult applications. Easy to use. Just mix and apply. Resbond 940LE cures in minutes to form an electrically and chemically resistant bond that will prevent cracking in thermal shock applications. ● Applications include bonding and insulating quartz fixtures, bulbs, halogen lamps, thermocouples, heat sensors, fiber cables, glassware etc. ● Users Report: Resbond 940LE bonds high performance light bulbs in a high speed precision production line.

Resbond 940HT 2800°F Fast Set, High Temp. Adhesive

● New, fast setting, Alumina adhesive can be used continuously to 2800ºF. Just mix and apply. 940HT sets in 15 minutes and cures in 5 minutes at 175ºF. ● Excellent adhesion to ceramics, metals, glass, composites, etc. Resistant to liquid metals, most chemicals and solvents, oxidizing and reducing atmospheres and offers good electrical properties. ● Applications include bonding sapphire tubes to metal end caps for use to 2650ºFand joining metal to ceramic in bonding heating elements to electrical terminals for continuous use at at 2500ºF. It is ideal for any high temp. bonding application.

Resbond 970N High Temp Adhesive Selector Kit

● This new selector kit contains seven 4 oz. samples of Cotronics Specialty Adhesives (901 fiber based, 919 Electrically Resistant, 940 Fast Setting Ceramic, 950 Metallic Aluminum, 989 General Purpose, 7030 High Strength and 907GF Adhesive and Putty). (see pdf file for physical properties). ● They are easy to use. Just apply and cure at room temperature. No VOC's. No odors. ● They have excellent adhesion, high temp. stability, dielectric strength, mechanical properties and thermal shock resistance. ● They have excellent adhesion, high temp. stability, dielectric strength, mechanical properties and thermal shock resistance. ● They are resistant to molten metals, oxidizing and reducing atmospheres, most chemicals and solvents. ● The 970N Selector Kit is the Ideal Choice for Simplifying Product Evaluation and Selection.

Durabond 950 952 954 Metallic Composites

● Durabond adhesives and putties were specially formulated to bond metals, ceramics, and dissimilar materials for use to 2000ºF. These metallic composite adhesives, overcome the brittle bonds obtained with ceramics and offers some of the ductility and impact resistance associated with soldering and welding. ● Durabond Adhesives can be drilled, tapped, machined, etc. They are safe and easy to use. ● Choose from the following formulations:

Nancy Dai　

0769-23130726

Room 701, Building 3, Fonghui Plaza, Hongyi Road, Nancheng Street, Dongguan City, Guangdong Province, China

Scan, WeChat customer service