PRODUCTS
Cotronics’ Ceramic Boards are made from Asbestos Free, High Purity Refractory Fibers. They are resistant to oxidizing and reducing atmospheres, molten non-ferrous metals, steam, most chemicals and solvents.
They offer outstanding thermal insulation, low thermal conductivity and heat storage, good dielectric strength, high resiliency, mechanical and thermal shock resistance and sound absorption.
Offer excellent thermal shock resistance and can be heated to 2000°F and cooled in minutes.
Just cut, saw or drill. Strong, free standing, high temperature shapes and parts can be easily constructed. Use for constructing furnaces, furnace supports, heat shields, laboratory equipment, rigid insulation, trays, gaskets, etc.
Rescor 902 2100°F Alumina Silicate
● Easily machined with standard shop equipment. Can be turned, drilled and shaped. Produces sharp, detailed parts with close tolerances.
● 902 provides excellent electronic, mechanical and thermal properties and will not out gas in a vacuum.
● Applications Include: electrical insulators, furnace components, brazing, soldering, welding fixtures, thick and thin film applications, R.F. heating fixtures, prototype ceramic components, etc.
Rescor 914 1000°F Glass Ceramic
● Dense and vacuum tight. Machines on conventional shop equipment and standard cutting tools. No post machining heat treatments are required.
● Offers high impact and mechanical strength and low thermal conductivity.
● Ideal for vacuum feed thrus, electrical and vacuum needs, electrical parts and can be metalized for soldering applications.
Rescor 915 1800°F Glass Ceramic
● Dense and vacuum tight, glass ceramic composite with “0” porosity. No heat treatments are required.
● Can be ground, sawed, turned, tapped, milled and drilled, etc. Offers excellent electronic properties, even at high frequencies.
● Ideal for critical medical and vacuum applications, for insulators with high dielectric strength and chemical resistance.
● Provides the chemical, thermal and electrical properties of standard high purity alumina ceramics.
● Can be machined with standard shop equipment. No heat treatments are required.
● Now 96%, high Alumina parts can easily be made with the convenience of an "in house" process.
● Ideal for applications in electrical, electronic, metallurgical and vacuum industries.
Rescor 310M 3000°F Fused Silica Foam
● 310M Ceramic foam is composed of over 99% pure Fused Silica ● Ceramic and offers low thermal expansion and conductivity, high thermal shock resistance and high thermal reflectance.
It is easily cut, sawed and drilled.
● 2000ºF, white hot, parts can be immersed in water with out cracking.
● Resistant to: oxidizing and reducing atmospheres, molten metals, steam, corrosive gasses, most acids, chemicals and solvents.
Road 1 page 6 strip
Contact Us
Nancy Dai
0769-23130726
Room 701, Building 3, Fonghui Plaza, Hongyi Road, Nancheng Street, Dongguan City, Guangdong Province, China
Copyright © 2012-2025 Dongguan Hongyue Trading Co., Ltd.-Vulcanization. All Rights reserved
Scan, WeChat customer service
Copyright © 2012-2025 Dongguan Hongyue Trading Co., Ltd.-Vulcanization. All Rights reserved